AUDIO
AMP
  • 맨리 스팅레이 II

맨리 스팅레이 II

0
11,600,000원
공유
구매혜택
할인적용 : 적립 마일리지 :

 

STINGRAYIIovew_1_151613_170509.jpg
STINGRAYIIovew_151601_170521.jpg

 

 

DETAILS

 

The famous Manley Stingray stereo integrated amplifier has been renewed and refreshed. Allow us to present to you the Stingray II integrated tube amplifier with full featured RF and IR remote control. We also make another model with a built-in iPod dock called the Stingray iTube that you can learn about here.

 


The STINGRAY II is the next evolution from our acclaimed Stingray Integrated Amplifier, legendary in the hifi world since it first swam from our labs in 1997. Originally conceived with particular attention paid to optimal component placement for the purity and symmetry of the signal path layout, the Stingray quickly became one of our best-selling products. The Stingray II retains the same basic tube circuitry and marvelous output transformers as the original with some important improvements:

 

The high voltage tube energy storage has been increased vastly resulting in even more solid and coherent bass control and impact.

 


A headphone jack has been added to the right side facia. This jack re-routes the output from the speaker binding posts and mutes the Subwoofer output feed. This makes the Stingray II a fabulous headphone amplifier!

 

The 4th input source is an 1/8" (3.5mm) TRS mini jack for convenient hookup with portable devices and computers on the left front facia.

 

The Remote Control works with both Radio Frequency and InfraRed technologies. Using the remote in RF mode gives freedom from having to "point and shoot." The RF remote is omnidirectional and works through walls and cabinets. IR capability is included for those with Universal Learning Remote Controls for consolidated integration into existing systems. The volume control, balance adjust, input switching, and display options are all on the RF/IR Remote Control. Additionally user can perform the MUTE, DIM, INSERT and STANDBY commands with the

 

Remote Control.

 


Each INPUT can be individually level trimmed to match and to optimize system gain staging of various input devices.

 

The fancy blue LED displays surrounding the INPUT and VOLUME encoder knobs can be dimmed down or turned off entirely, after a user-settable time period, or a "screen-saver" random light sequence can be selected. Speed and intensity of the "Starlight" mode can be tweaked to taste.

 


All custom user settings are hard written into memory when the unit is put into STANDBY mode and thus retained if power is later interrupted.
There is even a SLEEP timer which is programmable from the remote control to allow you to drift off carefree dreaming of your musical Stingray for 15, 30, 45 or 60 minutes while it gracefully lowers the volume and puts itself into STANDBY mode.

 

Individual sealed gold contact relays deliver the selected input into the volume control system before hitting the first 12AT7 input tubes. Following the mighty 6414 driver/phase splitter, the trusty EL84 output stage can be switched between either 20 watts of TRIODE power or 40 watts of Ultra Linear mode push-pull operation. Individual bias for each tube is easily adjusted using the trimpots and test points, conveniently located on the top surface of the amplifier. The Stingray's power supply is extra-rugged and stiff, a MANLEY hallmark. It swims with the sharks: fast, agile, fluid, and with consummate authority.

 

Post-volume SUBWOOFER OUTPUT allows easy hookup of outboard line-level driven active powered subwoofers. This output is after the volume control so that the subwoofer will track the volume level changes of the main speakers. The SUB OUTPUT is a line level and full frequency output that is AFTER the volume control so your powered subwoofer follows the same volume as your main speakers. These are unbalanced RCA jacks, line level. They feed the line inputs of your subwoofer, NOT the speaker jacks.

 


A switchable TAPE LOOP is standard. The TAPE SEND is the output of the selected input before the volume control. The TAPE RETURN can also be used as a 5th line input if needed.

 

RECORD OUT (aka Tape OUT)  is BEFORE the volume control so you can record whatever input you have selected without your listening level affecting the level going to your recorder. These are unbalanced RCA's. It is UNbalanced RCA's and UNbuffered so check out the input Z to your recorder to make sure it won't load down the Stingray main input while it is plugged in. Usually with unbuffered record outs we recommend you only plug in your recorder only when you are actually recording...

 

Tape LOOP: Also known as an INSERT point, the SEND or Tape Out comes off the selector switch as the Record Out option does going to your outboard EQ or Merlin BAM unit or tape recorder and then the signal returns (RETURN) to the Stingray in front of of the volume control so you can play tunes. A toggle switch selects whether the Tape LOOP (and whatever is plugged into the Tape Loop) is active or the signal goes straight through the Stingray as normal. If you have the Merlin BAM system, order your Stingray with the Tape LOOP option.

NOTE: The SUBWOOFER OUT, RECORD OUT, and TAPE LOOP are all passive. The RECORD OUT comes straight off the input select switch. So whatever source is selected will show up passed through at the TAPE OUT. With the Stingray, the MANLEY team has struck a remarkably harmonious balance in design which satisfies the sonic desires of the audiophile and the rocker, the artist and the musician, the student and the master, the yin and the yang. We invite you to experience the stunning sonic quality and visual beauty of the Stingray personally.

 

[제품 사양]

 

 

•3 x Stereo Line RCA Inputs
•1 x Stereo Line 1/8" TRS mini-jack Input
•TRIODE - UL Output Stage Mode Switching
•RECORDING OUT
•SUBWOOFER OUT
•TAPE LOOP (Insert) with Bypass switch
•1/4" Headphone OUTPUT (mutes speakers and subwoofer output when deployed)
•Logic controlled Volume and Balance functions
•All-Vacuum Tube Lo-feedback Stereo Integrated Design
•Output Tubes: 8 x EL84 Ships with Russian NOS EL84M (aka 6Pi14Pi-EB)
•Driver Tubes: 2 x 6414 Ships with GE or RAYTHEON JAN NOS USA or 6414W
•Input Tubes: 2 x 12AT7EH Ships with: 12AT7EH large plate Electro-Harmonix Russian
•Maximum Output Power UL mode: 32 Watts x 2 channels 1.5% THD @ 1kHz into 5 Ohms
•Maximum Output Power TRIODE mode: 18 Watts x 2 channels 1.5% THD @ 1kHz into 5 Ohms
•Frequency Response: 15 Hz - 58 kHz, -1dB
•Gain: 35 dB at max Volume
•Input Sensitivity UL Full Power: 210 mV in = 32 watts out into 5 Ohms with volume control at maximum
•Input Sensitivity Triode: 41mV in = 1W into 5 Ohms with volume control at 20dB gain setting
•Input Sensitivity UL: 35mV in = 1W into 5 Ohms with volume control at 20dB gain setting
•Crosstalk: -72dB See Chart
•S/N Ratio: typically 72 dB A-WGT, 1W output, 20dB gain, Source Z = shorted input
•THD+N Ratio: typically 64 db at 1W output, Bandwidth 22Hz-22kHz, Source = 1kHz Sine wave
•Input Impedance: 12 kOhm nominal
•Optimum Speaker Load: 5 Ohms
•Speaker Terminal Output Impedance: 2.36 Ohms @ 20Hz, 2 Ohms @ 1kHz, 1.83 Ohms @ 20kHz
•Damping Factor: 2.4
•Headphone Jack Output Impedance: 53 Ohms
•Scratch Factor: Use pennies under pointed feet to avoid marring cabinetry. Try quarters if you are in upper tax brackets. The bargain performer would be nickels. Paper currency does not function as well. Euro coins work 1.54 times better.
•Remote Control Type: RF (radio frequency) and IR (infrared), user selectable
•Volume Control: Cirrus Digital Level Control System, controlled by Grayhill Rotary Encoders
•Volume Control Range: 102dB in 1dB steps turning slowly, with larger steps as rate of turn increases
•SLEEP timer: 15, 30, 45, 60 minutes
•Power Consumption (Standby): 6W
•Power Consumption Idle: 198W
•Maximum Power Consumption at Full Power: 300W
•Fuse type and ratings @ 117 VAC operation:
MAINS fuse: 3 Amp 3AG slow-blow use glass body Littlefuse Series 239
•Fuse type and ratings @ 230 VAC operation:
MAINS fuse: 1.6 Amp 3AG slow-blow use glass body Littlefuse Series 239
•B+ FUSES (2): MDA 1/4 AMP, 250 Volt SLO-BLO, Ceramic.
•Power Supply: is factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
•Operating Mains Voltage: changeable with power transformer re-wiring on PCB and fuse value change.
•Mains Voltage Frequency: 50 ~ 60 Hz
•Power Cord: Detachable IEC standard.
Appropriate power cord supplied for original destination country
•Dimensions: W= 19", D=14", H= 7 1/2"
•Shipping Weight: 35 lbs.

 

배송안내

- 오전 12시까지 입금이 확인된 상품에 한해 당일 출고가 진행되며, 재고 소진 제품, 수입제품 또는 주문 후 제작이 진행되는 상품의 경우 특성상 배송이 지연될 수 있습니다

- 배송은 택배, 화물배송, 직접 설치 등 상품의 특성에 가장 적합한 방법으로 진행됩니다.

- 오디오, 가구 등 일부 상품의 경우 지역(제주, 도서 산간) 또는 제품 특성에 따라 추가배송비 입금 요청이 있을 수 있습니다.

- 입고 예정인 제품을 함께 주문할 경우, 입고 후 통합 배송이 이루어집니다. 만약 기간 소요가 없는 일반 제품을 먼저 수령하기 원하실 경우 별도 주문을 해 주시길 바랍니다.

- 특정 제품에 한해 배송, 설치가 별도로 진행될 수 있습니다.


택배배송

- 평균 배송 기간은 주말제외, 3 ~ 7일이 소요됩니다.

 

화물배송(서울, 경기) 

- 부피가 큰 오디오나 가구, 조명의 경우 화물 배송을 진행하며 특정 제품에 한해 별도의 운송비가 부과될 수 있습니다.

- 배송 이외 설치가 필요한 경우 별도 설치 비용이 청구될 수 있습니다. 품목에 따라 직원 안내에 따라 배송 및 설치비 지급방식을 결정이 진행됩니다. 

- 채널 오디오의 경우 배송지에서 제품 배송 이외에 케이블링, 네트워킹 작업이 이루어 집니다

교환 및 반품안내

취소 및 교환은 소비자보호법 및 전자상거래 소비자보호에 관한 법률과 공정거래위원회의 소비자분쟁 해결기준에 따라 처리됩니다


교환

배송 완료 후 상품 자체의 하자가 발견되어 7일 이내에 고객센터로 접수하여 주신 경우에만 교환이 가능하며 그 이후에는 어떠한 경우라도 반품이 불가합니다.

- 상품이 불량인 경우, 주문한 내역과 다른 상품이 배송된 경우, 배송과정 중 파손된 경우 30일 이내에 청약철회 가능하며 배송비는 판매자가 부담합니다. 

- 제품의 하자 혹은 파손 사유가 아닌 단순 변심으로 인한 교환 (색상, 사이즈 교환 등) 1회에 한하며, 구매자 측에서 교환 관련 비용 전액 (수입진행 비용 및 국내배송에 소요된 비용)을 부담합니다.

- 상품의 내용이 표시, 광고의 내용과 다르거나 계약 내용과 다르게 이행된 경우 공급받은 날로부터 3개월 이내, 그 사실을 인지한 날로부터 30일 이내에 청약철회 가능합니다.

제품 하자 혹은 배송 시 파손으로 인한 교환 비용은 공급자가 부담합니다.

네이버페이로 결제한 제품의 교환, 반품 신청 시 해당 처리 가능여부 파악 및 일정 확인을 위해 담당부서에서 검토 후 교환, 반품 안내가 이루어집니다.

일부 상품은 신모델 출시, 부품 가격 변동 등 제조사 사정으로 인한 가격 및 대체상품이 변동될 수 있습니다.

 

아래와 같은 경우, 어떠한 경우라도 교환 및 환불이 불가합니다 

상품 수령일로부터 7일 이내, 반품의사를 밝히지 않은 경우

고객님의 책임 있는 사유로 상품 등이 멸실 또는 훼손된 경우

고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우

고객님의 책임 있는 사유로 상품 등이 멸실 또는 훼손된 경우

부적절한 취급(아세톤 등의 화학물질) 또는 부주의(무리한 힘, 날카로운 것)로 인한 파손 및 고장의 경우

제품의 사용목적 이외의 사용, 개조 등으로 일어난 파손 또는 고장의 경우

지류 및 필기구

목재 가구의 경우 원목 특성인 직사광선, ·난방기구, 가습기 등에 의한 변형 (수축 및 팽창으로 인한 갈라짐) 또는 변색의 경우

천연가죽 특성의 불규칙한 가죽패턴, 가축의 성장과정에서 발생하는 가죽의 상처나 자국이 있는 경우

사용감에 다른 천연가죽의 자연스러운 주름이나 늘어남 현상 및 패브릭의 색 빠짐 현상(변색)의 경우

- 철재 도금 제품의 제작 공정상 불가피한 사항으로 색을 입히는 작업 과정에서 색상 톤의 미세한 차이, 표면이 매끄럽지 않거나, 도금 얼룩 및 스크래치가 일부분 있는 경우

배송 완료 후의 나무, 가죽, 패브릭, 오리털 특유의 냄새로 인한 경우

패브릭 직조에 따라 약간의 색상 차이가 느껴지는 경우

디스플레이 제품 구매 시

- 보내실 때에는 상품과 상품의 택, 포장박스 등 보내드린 구성품 그대로 반송해 주셔야 교환이 가능합니다 

- 교환/환불 의사를 통보하지 않고 반품하실 경우, 보류 상태(미처리)가 되니, 고객센터로 의사를 밝혀 주시길 바랍니다 


환불안내

- 환불 신청은 상품 수령일로부터 7일 이내 신청 가능합니다.

- 상품 회수 후 영업일 7일 이내에 결제 금액을 환불해 드립니다. 

- 상품 출고 이후 환불요청 시 상품 회수 후 처리됩니다.

- 결제일에 맞추어 대금이 청구될 경우 익월 신용카드 대금 청구 시 카드사에서 환급처리 됩니다.

- 신용카드결제 완료 후에는 사이트에서 주문을 취소할 수 없으므로 반드시 고객센터로 연락 주시길 바랍니다.


AS안내

- 브랜드 별 상품설명에 별도로 기입된 AS기준이 우선으로 적용되며 고객 비용부담으로 진행됩니다

- 일부 완제품으로 수입된 상품의 경우 A/S가 불가능합니다. (수입가구, 조명류)

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?